CASE STUDY

13244: PROJECT FEEDING BEARING RACES INTO DOUBLE DISC GRINDER

Feedall Model
Model 2500 C

APPLICATION

Feed from a random loaded floor mounted hopper, bearing races 1 T 6″ DIA. X 1/4 to 1 1/4″ thick. The bearings will be oriented diameter to diameter rolling then fed to a height of 50″ above the floor at a rate of 200″ per minute to a face grinder.
12″ wide elevator belt, 14 CU. FT. Hopper.
DWG. 9111 R 1

WIDTH

12" wide elevator belt

FEED RATE

200" per minute