Accept Input Shafts from Induction Hardener and convey them to an air-operated escapement. The escapement feds an air-operated, two-stream diverter that loads two parts at a time into two opposing load ramps on demand. The shafts will exit the ramps via an air-operated lifting blade and qualified for Robot pick-off to load a Centerless Grinder.


1” Wide Silent Chain


1/4 HP/AC Motor w/Variable Frequency Controller

Parts Fed (Size)

Input Shafts (0.63”Ø x 4.37” Lg.)

Feed Rate

18-20 Parts/Minute