Application
Feed from a random loaded, floor mounted hopper. The Sheared Steel Billets will be loaded into the hopper via an air operated tilting stand. The billets will then be elevated from the hopper via a cleated belt and deposited onto a rear mounted accumulation ramp. An air operated escapement device will load one part at a time into an Induction Heater.
Width
36” Wide Elevating Belt
Drive
3/4 HP/AC Motor
Parts Fed (Size)
Sheared Steel Bars (0.56”-1.00”Ø x 16.00”-28.00” Lg.)
Feed Rate
10 Parts/Minute