Hopper Feeders

Hopper feederModel 2000/3000/3600/4800 Hopper Feeders are used for feeding cylindrical type parts such as, cut bars, tubes, and shafts with diameter ranges within a 2:1 ratio either bulk loaded or hand stacked in multiple rows when part orientation is required. This feeder is designed for higher feed rates and gentle handling of the parts with lower noise levels. By design this feeder naturally orients parts with the elevator belt, thus eliminating recirculation of mis-oriented parts. Our Model 1650 Cross-Feed Conveyor mounted to the front of the elevator allows a continuous flow in an end-to-end orientation. These feeders may be used to feed centerless grinders, thread rollers, induction heaters for selective hardening or preheating for forging and many other applications.

Model 2000/3000/3600/4800 Series Bulk or Hand Stacked Cylindrical Part Hopper Feeders


Hopper feederModel 2212/2220/2230/2236 Hopper Feeders are designed to feed longer cut to length bars, tubes and machined parts with diameter ranges within a 2:1 ratio. Parts are hand stacked, bundle loaded or with modifications to the hopper loaded from a conveyor from a previous operation or a drop bottom gondola. This type of feeder is very suitable for non-mar applications when parts are finished or in a pre-heat treated state. Noise levels are very low due to no recirculation of parts. Our Model 1650 Cross-Feed Conveyor mounted to the rear of the discharge chute allows a continuous flow in an end-to-end orientation. These feeders may be used to feed centerless grinders, thread rollers, induction heaters for selective hardening or preheating for forging and many other applications.

Model 2230-2230 Series Bar and Shaft Hopper Feeders


Hopper feederModel 2400/2500/2600/2700 Hopper Feeders are designed specifically to automatically feed random loaded sliding, rolling headed or hanging parts with diameter ranges within a 2:1 ratio. Parts are elevated and gravity fed into chutes with various orienting devices designed to provide a continuous flow of product. These feeders may be used to feed all types of grinders, presses, machining equipment, and specialty machines, including forging equipment.

Model 2400/2500/2600/2700 Series Hopper Feeders


Hopper Feeders