CASE STUDY

12420: PROJECT FEEDING PISTON PINS INTO CENTERLESS GRINDER/END FINISHER

Feedall Model
Model 3600

APPLICATION

Feed from a random loaded floor mounted hopper automotive piston pins .825 to 1.504″ DIA X 2.62 to 3.44″ LG. The pins will be elevated from the hopper then discharged rolling to the front cross conveyor then fed end to end to an economy end finisher. The feed rate was 4500 pins per hour.
Note: This same match was used for feeding a centerless grinder.
36″ wide elevator, 20 CU. FT. Hopper
DWG. P 8472 end finisher
SWG. P 8479 centerless grinder.

WIDTH

36" wide elevator

FEED RATE

4500 pins per hour