CASE STUDY
17713: PROJECT FEEDING STEEL TUBES INTO CRIMPING MACHINE

Feedall Model
Model 2220 Elevating Hopper Feeder
APPLICATION
Feed from a manually loaded, floor mounted hopper, Steel Tubes. Tubes will be elevated from the hopper via a cleated belt and deposited onto a rear mounted accumulation ramp. An air-operated escapement device will load one part at a time onto a customer supplied v-nest for robot pickup.
WIDTH
20” Wide Elevating BeltDRIVE
1/2 HP/AC MotorPARTS FED (SIZE)
Steel Tubes (1.572”Ø x 3.144”-19.65” Lg.)FEED RATE
10 Parts/Minute