CASE STUDY

12912: PROJECT FEEDING ALUMINUM BILLETS INTO PRESS

Feedall Model
Model 2500 D

APPLICATION

Feed from a random loaded floor mounted hopper, saw cut billets, 2 1/2 to 3″ DIA. X 5 to 6″ LG. The billets will be oriented end to end and fed into a vertical chute, then transferred diameter to diameter one at a time at a height of 60″ above the floor at a rate of 6 to 10 per minute to a press.
12″ wide elevator belt, 35 CU. FT. Hopper.
DWG> P 8146 R 2

WIDTH

12" wide elevator belt

FEED RATE

6 to 10 per minute