CASE STUDY

12174: PROJECT FEEDING SOCKET BLANKS INTO THREAD ROLLER

Feedall Model
Model 2400 D

APPLICATION

Feed from a random loaded floor mounted hopper, socket shells 1 3/4″ DIA. X 1 1/4″ LG. The shells will be oriented axis horizontal with stem to the right side going into a thread roller at a height of 56″ above the floor at a feed rate of 10 to 20 per minute.
7 1/2″ wide elevator belt, 6 CU. FT. Hopper.
DWG. P 8333.

WIDTH

7 1/2" wide elevator belt

FEED RATE

10 to 20 per minute