CASE STUDY
10556: PROJECT FEEDING STEEL TUBES INTO PRESS
Feedall Model
Model 2400 C
APPLICATION
Feed from a random loaded floor mounted hopper, steel tubes 1.100 OD. X .860 ID. X 2.300″ LG. The tubes will be oriented end to end then fed to a height of 50″ above the floor then transferred rolling to a minster press at a rate of 45 to 90 per minute. 6″ wide elevator belt, 6 CU. FT. Hopper. DWG. P 7336.
WIDTH
6" wide elevator beltFEED RATE
45 to 90 per minute