CASE STUDY

10346: PROJECT FEEDING PISTON PINS INTO ROTARY GAS FURNACE

Feedall Model
Model 2400 D

APPLICATION

Feed from a random loaded floor mounted hopper, piston pins. The pins will be oriented end to end then fed to an escapement then escaped one at a time counted and fed to a point 65″ above the floor at a rate of 25 to 35 per minute.
7 1/2″ wide elevator belt, 12 CU. FT. hopper. DWG. PD 7055

WIDTH

7 1/2" wide elevator belt

FEED RATE

25 to 35 per minute